Services Near Me
Residential Garage Door Installation in Bellflower, California
Residential Garage Door Installation is a home improvement project that can add value to your property and make your life easier. A new garage door is also an important safety feature for your home, so be sure to invest in the latest technology.
Residential Garage Door Installation
Before deciding to install a new garage door, it's crucial to consider several factors: type of door, size and weather conditions. These will influence the time and labor costs for your project.
The most common types of garage doors include single panel, sectional and swing-out/sliding. Each type of door has its own unique features and benefits.
Composed of a single panel, a single-panel door is the least expensive to install. They're typically priced from $400 to $1,000, but can vary greatly depending on the style and manufacturer.
A swing-out or sliding door is a more common type of garage door and usually includes a curved section that can be opened like a regular door. They can be as costly as $1,000 to $2,000, but can add significant visual appeal to your home.
A sectional garage door is a popular choice and is the most commonly installed door in the United States. Each section of the door is connected with hinges that bend over a curved track. This allows the door to sit parallel to the ceiling when fully open and in line with the walls when completely closed.
Attach the upper and lower tracks to the wall with 5/16" x 1-1/2" lags. Ensure the upper and lower sections are parallel with the flag bracket at the top of the track. Next, secure the end bearing plate to the horizontal section with one 3/8" bolt. When tight, the flange should be even with the flag bracket and pointing away from the door.
To complete the bottom section, first attach the hinges with 2 lags per stile, even with the bottom corner of the door section. Then, slip the looped cable ends onto their studs on the bottom fixtures. Once that's done, lag the rollers on each of the stiles with two lags, leaving an extra 1/2" at each end.
Winding the Springs
To wind up the springs, insert a bar into the hole on the casting and crank it out and up until you feel the cast end begin to move inward toward the shaft. Then, turn down the set screws until they contact the shaft, then 1-1/2 to 2 turns more.
When you're finished, tighten the set screws until they're snug. This will give you a good idea of how well the springs are tensioned.
If you're installing a spring-tensioned door, be sure to use the right size springs. The stronger the springs, the more force they'll require to open and close the door. Using the correct springs will save you money over time and help your door last longer.
Opener Repair in Bellflower, California
If your garage door opener isn't opening all the way, making strange noises or not working at all, you need to have it repaired immediately. Having your opener repaired can save you money, ensure safe operation and increase the lifespan of the machine.
Garage Door Opener Repair Symptoms
If the door won't open all the way or make a loud noise, it's likely an issue with your motor or chain drive. We'll repair the motor or chain drive to restore function so you can use your garage door opener again with ease.
Usually this is an easy fix and can be done by anyone with basic DIY skills.
The most common cause of a broken garage door opener is a bad main gear drive. This is the plastic gear that comes in direct contact with the worm drive on your motor. If your garage door opener makes a grinding noise but the door won't move, it's probably time for this component to be replaced.
This is a bit more complicated than the other repairs in this article but still fairly simple to do by yourself.
Besides repairing the main drive gear, you can also fix the trolley carriage and the rail that attaches to it. You'll need to remove your opener's header bracket and disconnect the trolley from the motor and then slide off the old one and replace it with a new one.
Another simple and affordable repair to make is to replace the weather stripping around your garage door. This helps to seal the gap between your garage floor and the door, which can prevent your opener from slipping off its track.
You should have your door inspected at least once a year to make sure it's in good condition. It's also a good idea to have it serviced by a professional to ensure there are no problems with the tracks, rollers or springs that will cause damage to your door or opener.
A broken garage door opener can be dangerous. The opener's motor hoists a heavy door up and down the tracks multiple times a day, so it can exert an incredible amount of stress on the parts.
This can damage the tracks, causing them to bend or break. It can also make the door difficult to open and close.
Other possible signs that your opener needs to be repaired include a faulty keypad, remote control or wall control panel, damaged safety eyes, and a malfunctioning logic board. Having these components fixed or replaced by your Precision Garage Door Technician will help restore functionality and ensure your opener continues to operate safely.
Regardless of the type of garage door opener you have, Precision is always prepared to perform any necessary garage door opener repairs and maintenance. We have the tools and skills to provide quick and efficient service for a variety of brands, including LiftMaster, Wayne Dalton, Chamberlain, Genie, Stanley and more.
Opener Installation in Bellflower, California
The garage door opener is one of the most important parts of a garage door system. If it's not installed correctly, it can cause damage to other components and make your garage door more difficult to open and close.
How to Properly Install a Garage Door Opener
When buying an opener, choose the right type for your home — whether it's a belt-drive, chain-drive, or electric opener. The type of opener you choose should be based on the size of your garage and the style of the door it will be opening, as well as your budget.
1. Consider a Pro Installation
For heavy doors or those with tall, steep sides, it's best to hire a professional for opener installation. They'll be able to install the opener in a safe, fast, and efficient manner.
2. Check Your Spring and Rollers
It's a good idea to have a professional check out your current opener before installing a new one. They'll be able to diagnose any issues and ensure that your door is working properly.
If your door doesn't open as easily or loudly as it should, start by checking for broken or wobbly rollers and brackets. Also, check the torsion spring (mounted on the header above the door opening) for breaks in the coils. If you find a spring that is broken, replace it as soon as possible, or else your garage door may stop working completely.
3. Adjust Your Opening Force
If you have a manual opener, take a look at the instructions to see where the opening force adjustment screws are located. If the screw isn't in its proper position, turn it just a little to the left or right until you have the force you want.
4. Check Your Safety Systems
If your opener has a safety reverse system or an electric eye, it's important to make sure they're functioning properly. It's recommended to check them every month and readjust them if necessary.
5. Change Your Wires
If the wires that run from your opener to the photo eyes and the wall button are exposed, you should replace them with new ones. These wires have probably been in your garage for a long time and they're likely to be nicked or worn. It only takes about 15 minutes to run a new wire, but it's worth the cost and inconvenience to prevent damage to your garage door.
6. Test Your Remote Control
If you have a remote opener, test it to see if the button works. If it's not working, call a technician for repair or replacement.
7. Test Your Garage Door
Once you've had your new garage door opener installed, it's a good idea to test it out by opening and closing it manually. If you notice a significant amount of resistance when the door is opened, it could be caused by your finger getting caught in the track.
If you have any questions about your garage door or opener, don't hesitate to contact us at AAA Garage Door Inc. We'll help you get your door and opener in top working condition again.
Spring Repair in Bellflower, California
Garage Door Spring Repair Basics
Garage door springs are a major part of the operation of your garage doors. They extend and contract with the help of cables and pulleys to open and close the garage door. Unfortunately, they sometimes break, causing your garage door to either open or close improperly. If this happens, you can fix a broken spring yourself or call a professional. But before you start, it’s important to understand how they work and why they might need repair.
Torsion springs are used in most garage doors. They are mounted on the wall above the garage and extend or collapse with the help of cables and pulleys attached to the horizontal tracks that run through the ceiling of the garage. A damaged or broken torsion spring can cause the door to open or close erratically or not at all.
Depending on the size of your garage, you may have one or two torsion springs. If you have a single torsion spring, it will be attached directly to the door, while if you have a double torsion spring, it will be connected to the cable and pulleys in the track.
It’s a good idea to replace torsion springs as soon as they are damaged or break, and that includes the ones that are closest to the motor. If you do not, you could end up putting unnecessary stress on the motor and damaging it.
If you’re inexperienced with spring repairs, it’s a good idea to hire a professional. They have the proper tools and training to complete the job safely.
Coil springs, which are found on many vehicles, work in conjunction with shocks and struts to maintain suspension movement. They absorb shock and force, allowing the truck to smoothly shift over bumps and dips on the road.
These springs are not only essential in a vehicle’s suspension, but they also help to prevent the wheels from rubbing together. If a coil spring is damaged or worn, it will not be able to do its job effectively, and your vehicle’s suspension will fail.
To keep your coil springs in tip-top condition, it’s a good idea to spray them with a silicone-based lubricant three or four times per year. This will keep them from rusting, which can significantly shorten their lifespans.
You should replace your coil springs in pairs—for example, both front coil springs—to ensure the entire car rides evenly. This will allow your vehicle to run at its best.
If you don’t know what type of spring your garage door requires, it’s a good idea to ask the professionals at White’s Automotive Center. They will be able to provide you with the right replacement springs for your specific model of door.
There are three common types of extension springs: open-looped, double-looped and clipped. Each has its own strengths and weaknesses, so it’s important to choose the right one for your needs. You can purchase replacement springs from your local hardware store or through a manufacturer. However, it is more cost-effective to buy them from a company that specializes in garage door springs. They will have them in stock and can easily answer your questions.
Garage Door Panel Repair in Bellflower, California
Garage Door Panel Repair - How to Fix a Dent
Panels form the mainstay of your garage door, keeping it safe and secure while adding to its aesthetic appeal.
Garage doors come in a range of materials, such as wood. Depending on the style and material of your door, you may have several options for repairing or replacing its panels.
1. DIY: Do It Yourself
If you are experienced working with tools and can perform minor repairs on your own, fixing a damaged garage door panel may not be too difficult for you. However, be mindful of safety precautions and make sure all necessary tools are available.
2. If you don't know how to tackle it yourself, contact a professional who can take care of the task for you.
3. Repairing a Dent: When It's Possible
When your garage door panel has been dented, it may be more cost-effective and easier to repair the affected area than replace the entire panel. Dents can be caused by hailstones or other storm debris, physical objects like balls that get kicked into the door, or even just from impact from cars.
4. If you don't have access to a hammer or other tool, heating the dent may be enough to straighten it out in its upright position.
5. Metal doors with dent can be repaired using adhesive.
6. If your wooden door is older, you may need to replace the entire panel.
7. If the dent is minor, you can use aluminum foil to apply heat to it and restore its original look. This will help straighten out the area and restore your car's paint job back to new.
8. If the dent is extensive, you can hire a company to repair it for you.
9. The most frequent cause of garage door denting is accidental impact from a vehicle.
Denting in your panel can be both frustrating and irritating. It could also lead to other issues, such as the door buckling or damaging other components of the interior.
It can be challenging to tell whether your panel is actually broken or just showing signs of wear and tear, so take the time to inspect it regularly.
Once you determine how severely damaged a panel is, it's essential to get it repaired promptly in order to avoid further harm and extend the lifespan of your garage door.
Once you know how much it needs replacing, begin searching for a replacement panel that matches your garage door's size and shape. Aesthetics are usually top of mind when selecting a new garage door, so finding one that matches what you currently have can be an advantageous move.
Panel replacement costs can range anywhere from $200 to $800, so it's essential that you consider the total cost when making your decision. Include labor, setup and mobilization fees as well as any extra charges associated with hiring a general contractor to oversee the project.
Garage Door Maintenance in Bellflower, California
Simple Garage Door Maintenance You Can Do Yourself
The garage door is an important part of your home, and it can be a safety hazard if you don't keep it maintained. If you haven't had a professional tune up your garage door in a while, there are some simple maintenance steps you can perform yourself to help improve your safety conditions and decrease repair costs for years to come.
A visual inspection of the garage door is a must every six months. Look for peeling, fading or cracking that could affect your curb appeal and cause moisture to leak into your garage. Also, check your weatherstripping for tears or rips that can allow moisture to enter your garage and encourage mold growth.
Adjust the Photo-Eye Sensors
A common problem that causes garage doors to not automatically reverse is a misalignment of the photo-eye sensors. To fix this, remove any debris and clean the sensors. Then, realign them until the indicator light no longer flashes.
Tune Up Your Spring System
The springs on your garage door help it raise and lower. Regularly checking and maintaining the springs can keep them in good condition and extend the lifespan of your door. You can do a simple test to see whether or not your springs are properly balanced by pulling the release handle when you shut the door, then lifting it halfway up. If it stays in place, it's balanced; if it starts to slowly rise or drop, the springs are worn and need to be replaced.
Grease Your Overhead Springs and Chain or Screw
Keeping your garage door parts greased up will help them last longer and prevent corrosion. You can do this by spraying a white lithium grease, available at your local garage door specialist, on the opener's chain or screw. Then, you can add some spray lubricant to the springs.
Inspect the Tracks and Lift Cables
When your garage door is closed, it rests on the horizontal tracks that are attached to the wall on either side of your opening. The tracks can be damaged from rust or other damage, and they'll affect how your door opens and closes. Inspect the tracks for bending, rust or other signs of damage and contact a professional to repair them if necessary.
Install a Weather Seal Strip
The rubber weather seal strips on your garage door's bottom help keep water and other outside elements out of your garage. They're available at hardware and home improvement stores in different sizes, and can be installed in just a few minutes. They're a simple way to save energy and keep out unwanted drafts, insects and rodents.
Inspect Your Hinges and Vertical Tracks
When the hinges on your overhead door panels bend or sag, you'll need to replace them with new ones. Inspect the jamb brackets and strut that connect the vertical tracks to the framework on either side of your garage opening for excessive wear or dents.
If you notice a gap or tear in the weather seals or weather stripping, call a professional to have them replaced. This will ensure that you're not having to pay for repairs in the future, and will help keep out unwanted insects, critters and water from entering your garage.
Garage Door Repair in Bellflower, California
When you’re looking for a local garage door repair company, it’s important to do your research. Check their reviews, find out if they offer payment plans and look for one that has strong work guarantees.
Pros and Cons of Doing Garage Door Repair by Yourself
If you’re handy and enjoy working with your hands, do-it-yourself garage door repair might be a good option for you. It’s a great way to learn about the mechanics of your door and its parts, and you can save money on labor costs.
Some repairs are pretty easy to do, while others are more complex. Before you start, make sure your tools are the right size and you have enough time to complete the job. You should also have a list of tasks and a timeline for when you need to get them done so you can stay on top of it all.
For example, if your garage door is shaking when you open or close it, that could be a sign that the tracks are misaligned or damaged. You can try straightening them with a soft mallet, or you can call a garage door professional to do it for you.
Another common problem is that your garage door doesn’t seem to move when you press the button. You may need to adjust the limits on your opener to make it move a little more slowly when you open or close it.
This problem could be caused by a broken spring, which will need to be replaced. Replacement springs can cost anywhere from $100 to $200 depending on their size, material and weight.
If the doors of your garage aren’t properly sealed, they can let in drafts and heat that can increase your energy bill. Replacing them with insulated polyurethane panels will help keep your home cooler in the summer and warmer in the winter, saving you a lot of money over time.
It’s also easier to replace a door with multiple cracked or rotting panels than it is to repair a single panel. If the damage to your garage is extensive, you’ll want to think about replacing it altogether so that you don’t have to worry about cracks spreading and compromising the structural integrity of your garage door.
Lastly, hiring a professional is always safer than trying to fix your own garage door. You don’t want to end up hurting yourself or your family. You should always follow the proper safety precautions and use the right tools when fixing your own garage door.
If you need garage door repair, don’t hesitate to give us a call here at The Woodlands Garage Door Service! Our technicians have the experience, training and knowledge to handle any type of door repair or replacement. We pride ourselves on quality work and a strong customer satisfaction rating. Contact us today to schedule a free quote!
Garage Door Installation in Bellflower, California
When it comes to Garage Door Installation, Texas has a wide range of options for homeowners to choose from. Whether you’re looking for something fancy or functional, our team of experts will work with you to find the best solution for your home or business in a timely manner.
Garage Door Installation - Choosing the Right Garage Door for Your Home or Business
Choosing the right garage door for your home can greatly enhance the curb appeal and property value of your location. Moreover, new garage doors can dramatically increase your energy efficiency, improve safety and security, and reduce the likelihood of damage to your home or other important assets from a faulty or malfunctioning unit.
The right garage door is one of the most important investments you can make for your home. Our experts will help you determine the perfect style, material, and function to fit your practical and aesthetic needs while also ensuring a high level of durability and performance.
You can also select from a variety of other features that will make your new garage door stand out from the rest. These include openers, sensors, door locks and more.
Our experts are well versed in all the latest and greatest technology that will ensure your new door is installed correctly, safely, and effectively. Additionally, our experts are highly experienced and trained to handle the most complex and delicate tasks.
We’ll even come directly to your property, outfit you with a brand-new garage door of a make, model, and style that perfectly matches your practical and aesthetic requirements – so that you can enjoy a functional and convenient new addition to your home or business without any hassles.
Top of the line products from leading manufacturers like Lift Master and Genie are sure to be a smart investment. These products are known for their nifty features, such as wireless remote-control capabilities and intelligent sensors that can detect a vehicle’s position and automatically close or open the garage door.
The best part about our top-of-the-line products is that they are all made to last! We’ll give you a manufacturer’s warranty, so you can rest assured that your new garage door will be a durable and reliable addition to your home or business for years to come.
Our company is a family owned and operated business, so you can be sure we will always take pride in delivering the best possible customer service. Our friendly and knowledgeable technicians will work hard to answer all your questions in a timely manner.
Bellflower is a city located in southeast Los Angeles County, California, in the Los Angeles metropolitan area. It was founded in 1906 and incorporated on September 3, 1957. As of the 2020 census, the city had a total population of 79,190, up from 76,616 at the 2010 census. This made it the 65th most densely populated city in the United States, of cities over 50,000 residents (and the 8th most densely populated city in California).
The site was formerly rich farmland watered by artesian wells and floodwaters of the now-contained San Gabriel River. In 1906, F.E. Woodruff, a local real estate investor, founded the first municipality on the site, which was named Somerset in 1909 when a post office was established there. However, the proponents of the name ‘Bellflower’ claimed that the US Post Office Department rejected the name ‘Somerset’ to prevent confusion with Somerset, Colorado. The present name is derived from the bellflower apple, which was grown in local orchards during the early 1900s.
Originally settled by dairy farmers of Dutch, Japanese, and Portuguese descent, Bellflower and neighboring Paramount served first as the apple and later the milk production centers for Southern California, until soaring post-World War II property values forced most of the farmers to move several miles east to the Dairy Valley/Dairyland/Dairy City area (now the cities of Cerritos, La Palma, and Cypress). These farms were in turn converted into large housing subdivisions for Los Angeles’s growing population that worked in the region’s skilled industrial and service sectors. As a result, amongst the highly diverse backgrounds in Bellflower, there remains today a notable number of residents of Dutch descent; Bellflower is one of the only cities in the US to boast multiple Dutch grocery stores.
After Bellflower was incorporated in 1957, its gradual metamorphosis from agricultural center to residential suburb continued. From the 1950s through the late 1960s, Bellflower Boulevard, the city’s main thoroughfare, was a thriving commercial strip for shopping. Numerous retail and franchise restaurant firms began on this street, which also featured middle- and high-end boutiques, arts and crafts shops, and other small shopkeeps alongside larger department stores and banks. Today, Bellflower is an urban community within greater Southeast Los Angeles, and ranks amongst the most densely populated cities in the United States. It is a sister city with Los Mochis, Sinaloa, Mexico.
Bellflower is located at .
According to the United States Census Bureau, the city has a total area of 6.2 square miles (16 km). 6.1 square miles (16 km2) of it is land and 0.1 square miles (0.26 km) of it (0.86%) is water.
Bellflower is bordered by Downey on the north and northwest, Norwalk and Cerritos on the east, Lakewood on the south, Long Beach on the southwest, and Paramount on the west. Bellflower is part of Southeast Los Angeles County and the “Gateway Cities Council of Governments” (GCOG).
At the 2010 census Bellflower had a population of 76,616. The population density was 12,416.7 inhabitants per square mile (4,794.1/km). The racial makeup of Bellflower was 32,337 (42.2%) White (19.5% Non-Hispanic White), 10,760 (14.0%) African American, 731 (1.0%) Native American, 8,865 (11.6%) Asian, 615 (0.8%) Pacific Islander, 19,732 (25.8%) from other races, and 3,576 (4.7%) from two or more races. Hispanic or Latino of any race were 40,085 persons (52.3%).
The census reported that 75,877 people (99.0% of the population) lived in households, 399 (0.5%) lived in non-institutionalized group quarters, and 340 (0.4%) were institutionalized.
There were 23,651 households, 11,029 (46.6%) had children under the age of 18 living in them, 10,992 (46.5%) were opposite-sex married couples living together, 4,812 (20.3%) had a female householder with no husband present, 1,965 (8.3%) had a male householder with no wife present. There were 1,666 (7.0%) unmarried opposite-sex partnerships, and 170 (0.7%) same-sex married couples or partnerships. 4,618 households (19.5%) were one person and 1,540 (6.5%) had someone living alone who was 65 or older. The average household size was 3.21. There were 17,769 families (75.1% of households); the average family size was 3.67.
The age distribution was 21,749 people (28.4%) under the age of 18, 8,493 people (11.1%) aged 18 to 24, 22,418 people (29.3%) aged 25 to 44, 17,339 people (22.6%) aged 45 to 64, and 6,617 people (8.6%) who were 65 or older. The median age was 31.9 years. For every 100 females, there were 94.4 males. For every 100 females age 18 and over, there were 90.6 males.
There were 24,897 housing units at an average density of 4,034.9 per square mile, of the occupied units 9,459 (40.0%) were owner-occupied and 14,192 (60.0%) were rented. The homeowner vacancy rate was 1.7%; the rental vacancy rate was 5.1%. 31,897 people (41.6% of the population) lived in owner-occupied housing units and 43,980 people (57.4%) lived in rental housing units.
According to the 2010 United States Census, Bellflower had a median household income of $49,637, with 17.1% of the population living below the federal poverty line.
At the 2000 census there were 72,878 people in 23,367 households, including 17,128 families, in the city. The population density was 11,999.5 inhabitants per square mile (4,633.0/km). There were 24,247 housing units at an average density of 3,992.3 per square mile (1,541.4/km2). The racial makeup of the city was 22.37% White American, 33.09% Black or African American, 0.92% Native American, 9.69% Asian, 0.70% Pacific Islander, 24.38% from other races, and 5.13% from two or more races. 43.23% of the population were Hispanic or Latino of any race.
Of the 23,367 households 43.7% had children under the age of 18 living with them, 47.0% were married couples living together, 19.0% had a female householder with no husband present, and 26.7% were non-families. 21.1% of households were one person and 7.5% were one person aged 65 or older. The average household size was 3.09 and the average family size was 3.59.
The age distribution was 31.9% under the age of 18, 10.3% from 18 to 24, 32.0% from 25 to 44, 17.4% from 45 to 64, and 8.4% 65 or older. The median age was 30 years. For every 100 females, there were 95.1 males. For every 100 females age 18 and over, there were 90.6 males.
The median household income was $39,362 and the median family income was $42,822. Males had a median income of $32,658 versus $28,012 for females. The per capita income for the city was $15,982 and was below the “poverty rate”. About 12.8% of per capita family households and 15.8% of the population were below the poverty line, including 20.7% of those under age 18 and 10.0% of those age 65 or over.
According to the city’s 2021 Annual Comprehensive Financial Report, the top employers in the city are:
In the California State Legislature, Bellflower is in the 32nd Senate District, represented by Republican Kelly Seyarto. In the California State Assembly, it is in the 58th Assembly District, represented by Democrat Sabrina Cervantes.
In the United States House of Representatives, Bellflower is split between 38th and 40th congressional districts, which are represented by Linda Sánchez (D–Whittier) and Young Kim (R–La Habra), respectively.
Fire protection in Bellflower is provided by the Los Angeles County Fire Department from stations 23 and 98. Ambulance transport is provided by Care Ambulance Service.
The Los Angeles County Sheriff’s Department operates the Lakewood Station in Lakewood, serving Bellflower. In addition the sheriff’s department operates the Bellflower Substation in Bellflower.
The United States Postal Service Bellflower Post Office is located at 9835 Flower Street.
The Artesia Freeway (State Route 91) passes east–west through the southern portion of Bellflower, the San Gabriel River Freeway (Interstate 605) runs north–south just east of the city, and the Century Freeway (Interstate 105) runs east–west just north of the city.
Bellflower is served by bus service from Los Angeles County Metropolitan Transportation Authority (MTA) and Long Beach Transit. The city also operates Bellflower Bus, a fixed-route local bus.
Most of Bellflower is within the Bellflower Unified School District. St. John Bosco High School, and Valley Christian Elementary both privately run, are also in Bellflower. The Clifton M. Brakensiek Library is a branch of the County of Los Angeles Public Library.
- Anthony Brown (born 1992), basketball player in the Israeli Basketball Premier League
- Chris Carter, television and film producer, director and writer, creator of The X-Files
- Misty Copeland, principal ballet dancer from American Ballet Theatre
- Ronnie Correy, motorcycle speedway rider
- Savannah DeMelo, soccer player for Racing Louisville and the United States national team
- Kirk Fletcher, electric blues guitarist, singer and songwriter, was born in Bellflower in 1975.
- Nomar Garciaparra, Major League Baseball shortstop, 6-time All-Star, 2-time batting champion, TV commentator; attended St. John Bosco High School
- A.J. Gass, former Canadian Football League player
- Anthony Gose, Major League Baseball outfielder, currently in Detroit Tigers organization
- Shauna Grant (1963–1984), screen name of pornographic actress Colleen Applegate, was born here
- Don Hahn, producer of Disney’s “Beauty and the Beast” and “The Lion King”
- Trevor Hoffman, Major League Baseball relief pitcher, 7-time All-Star, born in Bellflower
- Jeff Kent, Major League Baseball second baseman, 5-time All-Star, 2000 National League MVP; born in Bellflower
- Vanessa Lam, figure skater, 2012 Junior Grand Prix finalist
- Darryll Lewis, former National Football League player
- Adam Liberatore, Major League Baseball relief pitcher with Los Angeles Dodgers
- Evan Longoria, Major League Baseball third baseman, 3-time All-Star graduated from St. John Bosco High School in 2003
- Kimberly McCullough, actress, General Hospital
- Wendi McLendon-Covey, actress, appeared in film Bridesmaids, was born in Bellflower
- Valentino Pascucci, professional baseball player, 2004–11
- Jerry Quarry, heavyweight boxer, former #1 ranked contender
- Carlos Quentin, Major League Baseball outfielder, 2-time All-Star
- Sergio Santos, Major League Baseball relief pitcher 2010-15
- Brandon Sermons, professional football player
- Anneliese van der Pol, actress; attended Ramona Elementary School and Bellflower High School
- Derrick Williams, professional basketball player with Maccabi Tel Aviv of the Israeli Basketball Premier League and the EuroLeague; formerly with five NBA teams, 2011 Pac-10 Player of the Year
- Ron Yary, professional football player in College and Pro Football Hall of Fame; graduated Bellflower High School in 1964
- Official website